Grip

Dimensions Minimum extension: 19.7" (48.25cm) Maximum extension: 12' (3.7 m) from stand mount Closed: 7.1' (2.2 m) Tube Diameters: 2.2" (55.45mm) Weight 33 lbs (15.3kg) Maximum Load Maximum extension: 13 lbs (5.9kg) Attachment Size 5/8" locking socket with 5/8" double threaded stud 1-1/8" locking female receptor

This 3 piece kit is designed for use with 1¼” speedrail. This kit allows to you to make a boom arm in any length (from 5’ up to 20’). Mounts on any stand with a 3½ ” grip head.

Construction: Chrome-plated steel Length: Minimum extension: 46" (117 cm) Maximum extension: 83.46" (212 cm) Load Capacity: At maximum extension: 15.43 lb (7.0 kg) Mount: 5/8" (16 mm) Receiver, 5/8" (16 mm) pin Weight: 7.94 lb (3.6 kg)

Supports up to a 20lb Load Extends up to 16’ Height. 8’ Height 8’ Boom

15lb weight for heavy duty boom/lightstand

This boom arm mounts on a stand with a Jr. pin or a baby receiver and will extend close to 6’ ending in a 5/8” baby pin. You can both tilt and rotate the end of this boom arm. (end rotates 360 degrees) Comes with two 10 pound counterweight shot bags. (stand not included)

Length: 8.8' (2.7 m) Weight: 23.8 lbs (10.8kg) Maximum Load: 11 lbs (5kg) at max extension Attachment Size: 5/8" (16mm) stud with 3/8" threaded adapter 1-1/8" (28mm) female receiver

Our bubble machine allows for continuous bubble output. This model has variable speeds and 1 gallon of bubble juice lasts 6 hours. The measurements are 30” long x 16” tall x 14” wide. It requires 9 amps of power. (does not include juice)

This 6 inch industrial C-clamp is made of heavy-duty cast iron with a machined steel screw for optimal durability. Use this sturdy C-clamp when you need a firm hold on your metal fabricating or woodworking projects.

This 4 inch industrial C-clamp is made of heavy-duty cast iron with a machined steel screw for optimal durability. Use this sturdy C-clamp when you need a firm hold on your metal fabricating or woodworking projects.

This 8 inch industrial C-clamp is made of heavy-duty cast iron with a machined steel screw for optimal durability. Use this sturdy C-clamp when you need a firm hold on your metal fabricating or woodworking projects.

This 12 inch industrial C-clamp is made of heavy-duty cast iron with a machined steel screw for optimal durability. Use this sturdy C-clamp when you need a firm hold on your metal fabricating or woodworking projects.

This 10 inch industrial C-clamp is made of heavy-duty cast iron with a machined steel screw for optimal durability. Use this sturdy C-clamp when you need a firm hold on your metal fabricating or woodworking projects.

This 6 inch industrial C-clamp is made of heavy-duty cast iron with a machined steel screw for optimal durability. Use this sturdy C-clamp when you need a firm hold on your metal fabricating or woodworking projects.

This 8 inch industrial C-clamp is made of heavy-duty cast iron with a machined steel screw for optimal durability. Use this sturdy C-clamp when you need a firm hold on your metal fabricating or woodworking projects.

This 10 inch industrial C-clamp is made of heavy-duty cast iron with a machined steel screw for optimal durability. Use this sturdy C-clamp when you need a firm hold on your metal fabricating or woodworking projects.

This 12 inch industrial C-clamp is made of heavy-duty cast iron with a machined steel screw for optimal durability. Use this sturdy C-clamp when you need a firm hold on your metal fabricating or woodworking projects.

This 4 inch industrial C-clamp is made of heavy-duty cast iron with a machined steel screw for optimal durability. Use this sturdy C-clamp when you need a firm hold on your metal fabricating or woodworking projects.

This 6 inch industrial C-clamp is made of heavy-duty cast iron with a machined steel screw for optimal durability. Use this sturdy C-clamp when you need a firm hold on your metal fabricating or woodworking projects.

This 8 inch industrial C-clamp is made of heavy-duty cast iron with a machined steel screw for optimal durability. Use this sturdy C-clamp when you need a firm hold on your metal fabricating or woodworking projects.

This split industrial C-clamp is made of heavy-duty cast iron with a machined steel screw for optimal durability. Use this sturdy C-clamp when you need a firm hold on your metal fabricating or woodworking projects.

The rust-proof construction, stainless steel shaft and bushing, aluminum jaws and knob. Patented Jaw design firmly grips almost any shape. Quick spin knobs reduce setting and release times. Jaw pads grip and protect the surface being clamped, and are easily replaceable in case of damage. Heavy threads on the shaft resist dinging.

Our C-Stand cart holds 12 C-Stands.

30” X 60” & 54” X 30” Removable Handle

This 10 inch industrial C-clamp is made of heavy-duty cast iron with a machined steel screw for optimal durability. Use this sturdy C-clamp when you need a firm hold on your metal fabricating or woodworking projects.

Is used to mount a small to medium size light fixture from a drop ceiling frame. Standard 5/8" Baby stud.

The durable chain clamp grips tight on any object up to 19 inch in circumference. With a hardened steel construction, this locking clamp holds and removes many differently shaped items easily.

For clamping a pipe to a pipe. Fixed cheeseborough for right angle junctions.

For clamping a pipe to a pipe. The swivel provides added versatility to rig in multiple directions.

Measures 10” long, used for fabrics and rags that don’t have gromets or tie offs and gives them an eyelet to tie rag off from.

The Come Along is a heavy duty pulling system.

Use to mount lights directly to the front edge of the bucket on a Condor Crane. Weight: 10lbs

This Cup Block is made of wood and is usually placed under wheeled objects in place of apple boxes in order to elevate objects and to prevent them from rolling. Dimensions: -5.25" x 5.25" x 1.50" -0.5" deep dished out center

Our cutters are made with a matte black fabric on a rigid frame. Flags can be used to protect the camera lens from flares, control spill light, provide shade, or shape/cut light.

Our cutters are made with a matte black fabric on a rigid frame. Flags can be used to protect the camera lens from flares, control spill light, provide shade, or shape/cut light.

Our cutters are made with a matte black fabric on a rigid frame. Flags can be used to protect the camera lens from flares, control spill light, provide shade, or shape/cut light.

Our cutters are made with a matte black fabric on a rigid frame. Flags can be used to protect the camera lens from flares, control spill light, provide shade, or shape/cut light.

Our cutters are made with a matte black fabric on a rigid frame. Flags can be used to protect the camera lens from flares, control spill light, provide shade, or shape/cut light.

- 20 pieces

Sturdy and durable metal cart used to transport a variety of grip gear with ease. Also available in a pre-set package.

Full Package includes the following: 2 Full Apple Boxes 2 Half Apple Boxes 2 Quarter Apple Boxes 2 Pancake Boxes 2 Lollipops 1 Baby Offset 1 Jr. Offset 2 Mafer Clamps 3 Milk Crates 4 Baby Plates 2 Jr. Plates 1 Beadboard Holder 1 Foamcore Holder 2 6” Jr. C - Clamps 2 6” Baby C - Clamps 6 #1 Grip Clip 6 #2 Grip Clips 6 Regular C - Stands 2 Low C - Stands 2 Reg. Combo Stands 1 4’ Ladder 6 25lbs. Sandbags 12 Grip Wedges 10 Camera Wedges 10 Assorted Cribbing 2 18 x 24 Solids 1 18 x 24 Single 1 18 x 24 Double 1 18 x 24 Silk 1 Frame 2 24 x 36 Solids 1 24 x 36 Single 1 24 x 36 Double 1 24 x 36 Silk 1 Frame 2 4 x 4 Solids 1 4 x 4 Single 1 4 x 4 Double 1 4 x 4 Silk 1 Frame 1 6 x 6 Solid 1 6 x 6 Single 1 6 x 6 Double 1 6 x 6 Silk 1 Frame

The mole fan is a quiet fan used to simulate wind effects in studios. Spyder bracket on bottom of stand replacement price $ 220.00.

Effects fan 1 is used for the effect of wind in someone’s hair. It’s our smallest effects fan. Includes stand

Effects fan 2 is used for a very subtle atmospheric wind effect or wind through a subjects hair/wardrobe. It’s our second smallest effects fan. Includes Stand

The Reel Effects IV is a big, powerful fan that has many of the same options as a Mole Fan except that the Mole fan is quieter. This fan has variable speeds and requires 14 amps of power. The fan measurements are: 19” diameter (grill diameter) 20” depth (depth of fan not including stand) DMX Capable The fan comes with a rolling stand and weighs approximately 50 pounds. Hit speed of up to 33 mph.

Infinitely flexible attachment arm for exact positioning of gear.

A flex fill is a soft, collapsible reflector used to bounce light. -Silver -Gold -(2) diffusions

A flex fill is a soft, collapsible reflector used to bounce light. -Silver -Gold -(2) diffusions

A flex fill is a soft, collapsible reflector used to bounce light.

A flex fill is a soft, collapsible reflector used to bounce light.

A flex fill is a soft, collapsible reflector used to bounce light.

A flex fill is a soft, collapsible reflector used to bounce light.

Butterfly sandbags, (aka Fly Away) are indoor/outdoor handled sandbags. The handle is sewn into the pocket edges, creating a wing motion when the bag is lifted. Because of this unique motion, the bag easily "releases" from your stands and booms. Weight: 15lbs

The Foam Core holder [AKA picthfork] stabs into the foam center and then the stud is placed in a grip arm or any other 5/8" baby receiver to be positioned anywhere as a reflector to bounce light or flag to block it.

Does not come with Fluid! ( uses Molecular Fluid) 1 Gal of fluid will last you roughly 2 hours of continuous use (this does not take into account how long the dry ice will last). the Unit Uses roughly 25 ML of juice per minute.

The Reel Effects DF-50 Hazer is used when you are looking for a light smoke effect (for example cigarette smoke in a bar). It measures approximately 21” long x 12” wide x 18” tall. It comes with a wireless remote control that allows you to operate from a distance. We rent this unit with a full tank of haze fluid which last approximately 35 hours. The hazer weighs roughly 70 pounds. - Comes with fluid in tank

The Reel Effects DF-50 Hazer is used when you are looking for a light smoke effect (for example cigarette smoke in a bar). It measures approximately 21” long x 12” wide x 18” tall. It comes with a wireless remote control that allows you to operate from a distance. We rent this unit with a full tank of haze fluid which last approximately 35 hours. The hazer weighs roughly 70 pounds. - Comes with Fluid in tank (holds 1/2 gal)

FQ-100™ Fog Generator The FQ-100™ performance fog generator is designed to meet the rigorous demands of the nightclub, theatrical and touring industries. This updated version of the industry standard F-100 fog generator produces any atmosphere – from dense fog to fine mist. The legendary Atmospheres® Fog Generating fluid is specially formulated to provide a dense, safe, water-based fog of a fine particulate size. In addition to low noise levels ideal for theatrical and studio work, the FQ-100 also includes an internal LCD digital menu system providing the ability to set the volume control, timer control, and DMX functions as desired. The FQ-100 performance fog generator continues the tradition and benchmark set by the original F-100. Features Large 9.5 liter ( 2.5 gallon) removable fluid reservoir for extended use Atmospheres® scientifically formulated fluid provides optimum particulate size for lighting applications LCD Menu Timer with interval, duration, and volume; set DMX; continuous fogging, Manual ON/OFF 3-pin and 5-pin XLR DMX in/out connectors Fluid level sight gauge User replaceable fluid filter Output 20,000 cu.ft (566m3) per minute maximum output 10 min / 1 liter fluid consumption rate 11 minutes warm-up time optoelectronic liquid sensor with auto shutoff

The FQ-100 performance fog generator is designed to meet the rigorous demands of the nightclub, theatrical and touring industries. This updated version of the industry standard F-100 fog generator produces any atmosphere – from dense fog to fine mist

The G300 is a dual-mode machine, offering water based fog and haze. Designed to perform in the most demanding of applications. Features Include: Optional DMX and Standard remote controls available Optional DMX interface - 2 channel Optional AUX port for external fac control

The IGEBA fogger is used outdoors only and generates a lot of smoke. This fogger requires both gasoline and fog juice and does not need electricity. This fogger uses a mineral based fog juice. One gallon of juice lasts an estimated 1.5 hours. This fogger measures 54” long x 12” tall x 10” wide. Fog Juice: Mineral Oil

This fogger is used outdoors only and generates a lot of smoke. This fogger requires gas and fog juice but does not require electricity. This fogger has wheels and can be moved easily during use. This fogger uses a mineral based fog juice. 1 gallon of juice lasts an estimated 1.5 hours. This fogger measures 40” long x 36” tall x 36” wide.

Power-Tiny Handheld Fogger Includes: -Battery pack -Charger -250 ml fluid tank -250 ml fog fluid -Case Spare Battery Rented Separately Procedure: Vaporizing fog generator Power requirement: 400W Voltage: 12V with battery Heat-up time: 1 Second Fluid tank capacity: 250 ml Fluid consumption: 10 ml/minute at continuous output Fog time with battery: 10 min. continuous output with battery or 150 x 5 sec. bursts

The Tiny CX is a battery-powered, microprocessor-controlled mini fog generator. - Small dimensions and light weight - Warm up time less than 1 second - Triggered with the start button or the optional radio remote, DMX-converter and timer - Battery supplies energy only when the fogging process is activated - Changeable battery - Continuous output for up to approx.15min. continuous output or 200 x 5 second bursts - Lowest fluid consumption

The Mole fogger is one of the original foggers used in the industry. This fogger is hand held and can be moved in and out of the shot very quickly. Smoke is controlled by a pump mechanism. One liter of fog juice lasts approximately 2 hours. This fogger measures 12” long x 12’ tall x 6” wide and requires 10 amps of power. Fog Juice: Rosco fog juice

Wattage: 1,200 W Maximum Fluid Consumption: 3.6 liter/hour Maximum Fluid Capacity: 1.0 gallon / 4.0 liters DMX Connectors Input: XLR 5-Pin Output: XLR 5-Pin Control Knobs: fog level, fog off time, fog on time (up to 250 seconds) Buttons: fog (toggles fog on/off), standby, timer (engages timer mode) LED Indicators: power and time Connector: XLR 3-Pin Cable Length: 15' / 4.5 m The remote panel can be disconnected to control the unit from a distance. Types: Vapour, Vapour Plus, or V-Hazer units Amount: up to 4 units Connector: XLR 3-Pin Power Requirements: 120 VAC, 60 Hz Heat: illuminates red while heating Ready: illuminates green when ready for fogging Housing: Rugged 12-gauge steel case, chip-resistant powder-coated paint Approvals: CE, RoHS, AMPTP #10 Dimensions: 22.6 x 10.9 x 9.8" (574.0 x 278.0 x 249.0 mm) Weight: 24.25 lb (11 kg)

The 10 x 10 frame is used to hold 10 x 10 rags (for example: silk, solid, single net, double net, ...etc.)

The 12 x 12 frame is used to hold 12 x 12 rags (for example: silk, solid, single net, double net, ...etc.)

The 12 x 20 frame is used to hold 12 x 20 rags (for example: silk, solid, single net, double net, ...etc.)

The 20 x 20 frame is used to hold 20 x 20 rags (for example: silk, solid, single net, double net, ...etc.) This frame breaks down into 4’ pieces for easy transport. Bag, stands, and rags not included

The 20 x 20 frame is used to hold 20 x 20 rags (for example: silk, solid, single net, double net, ...etc.)

The 4 x 4 frame is used to hold 4 x 4 rags (for example: silk, solid, single net, double net, ...etc.) This is a break down frame.

The 6 x 6 frame is used to hold 6 x 6 rags (for example: silk, solid, single net, double net, ...etc.)

The 8 x 8 frame is used to hold 8 x 8 rags (for example: silk, solid, single net, double net, ...etc.)

The furniture bar clamp is used to clamp wood together to stabilize for sawing or drilling. For Construction, Woodworking, Maintenance, Handle Material.

The furniture bar clamp is used to clamp wood together to stabilize for sawing or drilling. For Construction, Woodworking, Maintenance, Handle Material.

The furniture bar clamp is used to clamp wood together to stabilize for sawing or drilling. For Construction, Woodworking, Maintenance, Handle Material.

The furniture bar clamp is used to clamp wood together to stabilize for sawing or drilling. For Construction, Woodworking, Maintenance, Handle Material.

Pelican clamp gets its name from its profile and its ability to open wide and hold a lot. This clamp can grip onto a pipe hold a lot of weight.

Used to put a pin on wood.

Used to put a pin on wood.

The gator grip is a clamp with teeth.

Double wide gobo head

Made to clamp securely on overhead grids, car rigs, or camera car rails for mounting light fixtures. The Baby Grid Clamp can also be inverted with the pin mounting into a Grip Head for spanning pipe between two stands.

Made to clamp securely on overhead grids, car rigs, or camera car rails for mounting light fixtures. The Junior Grid Clamp can also be inverted with the pin mounting into a Grip Head for spanning pipe between two stands.

Ideal clamp pressure for light clamping and speedy application and removal Features: - Nickel plated steel jaws - Heavy-duty tempered steel springs

Ideal clamp pressure for light clamping and speedy application and removal Features: - Nickel plated steel jaws - Heavy-duty tempered steel springs

Ideal clamp pressure for light clamping and speedy application and removal Features: - Nickel plated steel jaws - Heavy-duty tempered steel springs

The Grip Helper is a combination of several adapters in one. The Junior Pin of the Grip Helper mounts into a light stand, and the Junior Receiver allows the mounting of a light fixture without upsetting the center of balance. In between there is a 3' to 6' telescoping Extension Arm fixed at a 45 degree angle with a 4-1/2' Grip Head attached. By using the Grip Helper, a large light fixture and Diffusion Frame up to 48'x48' can be used from the same stand.

An incredibly versatile 20” steel arm and gobo head used to hold flags, frames, rigging gear, etc.

A very strong and versatile arm used in conjunction with a C-stand. Can be positioned and re-positioned with ease into nearly any set-up.