Matthews

The MQ Mount is designed to securely hold T-12 LED fixtures with minimal or no light loss. The mount terminates to an industry standard 3/8” pin which can be used with any industry grip head. The 3/8” pin is knurled to prevent unwanted rotation and is internally tapped ¼”-20 to expand its length and rigging capabilities. part#420114 Key Features: Jaws designed for T-12 LED light tubes Knurled 3/8” pin compatible with all grip heads, including 2.5”, 4.5”, mini and microgrip heads. Tapped ¼”-20 pin for expanded rigging and expanded length. Manufactured from lightweight, high impact plastic and aluminum parts.

Holds Laptop up to 10.5 x 16.5" Lightweight: 1.8 lb Air Slots 5/8" Adapter Included Protective Case Included

The Matthews Monitor Mount is a strong, versatile and compact aluminum bracket that enables you to mount your flat-panel monitor to a light stand, C-Stand, or any other grip equipment with a 5/8" Baby pin/stud. It features a locking pan and tilt handles.

This ball head will support up to 39.6 lb (18 kg). It is supplied with a precision machined quick release plate that is well balanced and allows quick, safe and positive-locking of the camera to the ball head mount. The mounting plate can stay permanently attached to the camera to avoid taking the time to screw the camera onto the ball or screwing the ball onto the camera.

Manufactured by Matthews, this reflector is 75% lighter than a standard reflector. Ours measure 40” x 40”. We carry the standard silver and super soft silver. Ours go out with either a yoke to allow for pivoting or a polito bracket. Stand is not included.

Our roller features an all-metal construction with cushioned rubber rings on the risers to safeguard your gear from unnecessary bumps and vibration. The optimal wingspan on the base and locking wheels ensure the stand will remain stable and upright. Load Capacity: 55 lb Maximum Working Height: 71" Minimum Working Height: 37.5" Weight: 15.3 lb

Max Ht: 163” (414cm) Min Ht: 50" (127cm) Capacity: 58lbs. (26.3kg) Weight: 13lbs (5.9kg) 5/8” Pin

An incredibly versatile 20” steel arm and gobo head used to hold flags, frames, rigging gear, etc.

A durable and strong stand with the ability to handle medium sized lights. Equipped w/ Leveling Leg & Wheels Weight: 20 lbs Folded Height: 50″ Max Height: 152.5″ Width: 6″

Maximum Height: 136" (3454mm) Minimum Height: 49.5" (1257mm) Weight Capacity: 90lbs (40kg) Weight: 28lbs (12kg) Footprint: 43" (1092mm) Folded Base: 5" (127mm)

Max Height: 177.5" (4508mm) Min Height: 54.2" (1376mm) Capacity: 68lbs (30kg) Weight: 32lbs (14kg) Footprint: 43" (1092mm) Folded Base: 5" (127mm)

Max Height: 148" (3759mm) Min Height: 45.5" (1156mm) Capacity: 20lbs (9.1kg) Weight: 13.5lbs (6.1kg) Footprint: 33.5" (851mm) Folded Base: 5" (127mm)

Max Ht: 63”" (161cm) Min Ht: 30" (76cm) Capacity: 22lbs. (10kg) Weight: 8.25lbs (4kg) Footprint: 27.5" (70cm) Folded Base: 21" (54cm)

The strongest and most popular grip had in the industry. Plates feature 3/8" and 5/8" mounting holes.

Standard metal C-Stand arm measuring 60”

An incredibly versatile 20” steel arm used to hold flags, frames, rigging gear, etc.

Max Ht: 126.5" (321cm) Min Ht: 53" (135cm) Capacity: 22lbs. (10kg) Weight: 16lbs (7.2kg) Footprint: 27.5" (70cm) Folded Base: 21" (54cm)

Max Ht: 126.5" (321cm) Min Ht: 53" (135cm) Capacity: 22lbs. (10kg) Weight: 16lbs (7.2kg) Footprint: 27.5" (70cm) Folded Base: 21" (54cm) (apple box not included)

- Set of 3 robust 5" diameter wheels - Two-Way locking levers - Features a locking system which does not require any receiving hole in the leg - Wheels are easy to install and remove

This is an industry standard rolling stand. Here are the details: • We canny both Norms and Matthews brands • Made of heavy duty steel • All have rolling bases and come with a junior receiver and a 4.5" grip head (lollipop) • The Hi Hi Roller measures 7' collapsed and 20' fully extended. Max Ht: 249” (6325mm) Min Ht: 84" (2143mm) Capacity: 88lbs. (40kg) Weight: 43lbs (20kg) Footprint: 60" (1524mm) Folded Base: 16" (406mm)

The classic Hollywood stand. Here are the details: • We carry both Norms and Matthews brands. Made of steel. • We send ours out with an arm and a head (lollipop). Max Ht: 63”" (161cm) Min Ht: 30" (76cm) Capacity: 22lbs. (10kg) Weight: 8.25lbs (4kg) Footprint: 27.5" (70cm) Folded Base: 21" (54cm)

Our basic stand with a Jr. receiver. Here are the details: • We carry Norms combo stands • Made of steel • These stands have rocky mountain legs and come with either 2 or 3 risers • Ours do not come with wheels but we have wheels available to rent for an additional fee Max Height: 76.5" (1943mm) Min Height: 33.5" (851mm) Capacity: 72lbs (33kg) Weight: 16lbs (7kg) Footprint: 31" (787mm) Folded Base: 4" (102mm)

Our C-Stand cart holds 12 C-Stands.

This is the lowest stand we carry and is used quite frequently as the base for a stand. Here are the details: • Made of steel • Has a Jr receiver • Ours can come with or without wheels • They measure approx 12” in height

This is the lowest stand we carry and is used quite frequently as the base for a stand. Here are the details: • Made of steel • Has a Jr receiver • Ours can come with or without wheels • They measure approx 12” in height

We carry various parts for various stands. We can also fix them. Please inquire!

Heavy duty and rugged, these all-aluminum stands can withstand the rigors of location shooting. These stands are made with square tubular legs for additional strength. They are available with a Rocky Mountain leg for easy leveling on uneven terrain.

- Set of 3 robust 5" diameter wheels - Two-Way locking levers - Features a locking system which does not require any receiving hole in the leg - Wheels are easy to install and remove

Rolling turtle stands rent separate. Max Ht: 150” Min Ht: 54.5" Capacity: 40lbs. Footprint: 32"

Max Ht: 63”" (161cm) Min Ht: 30" (76cm) Capacity: 22lbs. (10kg) Weight: 8.25lbs (4kg) Footprint: 27.5" (70cm) Folded Base: 21" (54cm)

Ours measure 2’ x 2’. We carry a silver reflector and a mirrored reflector. - The silver reflector is one side shiny silver paper and one side silver leaf (hard side/soft side). - The mirrored reflector is one side mirror and one side shiny silver paper. -Reflector can be pivoted. -Reflector has a baby receiver so it will fit a 5/8” baby pin. -We send ours out in a wood box.

The spud adaptor is used to change into a baby receiver or a junior receiver.