General Head Type Ball Head Base Mount 3/8"-16 Thread Camera Mounting Thread Not Specified by Manufacturer Quick Release Plate Type Not Specified by Manufacturer Load Capacity 18 lb / 8.1 kg Number of Bubble Level(s) None Friction Control Yes Independent Pan Lock No Material Not Specified by Manufacturer Physical Dimensions H: 4.5" / H: 11.5 cm Weight 14 oz / 395 g
Our magnesium center ball heads are renowned for their smooth and precise movements and high quality manufacturing. PTFE is applied to the ball and blocking pads to eliminate all traces of jarring and skipping. The result is highly accurate positioning adjustments, even with long tele lenses. specsUnits: Imperial| Metric series 2 material magnesium quick release yes plate type quick release - with 1/4-20" screw panoramic rotation 360 ° lateral tilt -90° / +30° tilt range independent pan lock yes ball friction setting no working height 12.0 weight 0.6 kg load capacity 6 kg
GH3780QR ball head, is designed to be an extremely balanced product, that not only guarantees a high max load, but that also maximises other key features, too often overlooked by the end users. These features include smoothness, minimised drift angle, lightweight, low centre of gravity, greater tilt angles, compactness, ergonomics, safety and the Quick Release system. specsUnits: Imperial| Metric ball locking yes series 3 material magnesium quick release yes plate type quick release - with 1/4-20" and 3/8" screws panoramic rotation 360 ° lateral tilt +100° / -16° tilt range independent pan lock yes ball friction setting yes working height 12.6 weight 0.71 kg load capacity 21 kg
Manfrotto 808RC4 Specs General Head Type Pan & Tilt Head Base Mount 3/8"-16 Thread Camera Mounting Screw 1/4"-20 Male, 3/8"-16 Male Quick Release Plate Type RC4 Load Capacity 17.6 lb / 7.98 kg Number of Bubble Level(s) 3 Material Aluminum Pan & Tilt Range Lateral Tilt -90° to +30° Vertical Tilt -30° to +90° Panning Range 360° Physical Base Diameter 2.36" / 6 cm Dimensions H: 6.1" / H: 15.6 cm Weight 3.3 lb / 1497 g
3/8"-16 mount. By squeezing the control handle's integrated trigger, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. A thumbwheel set within the control handle can be rotated to apply tension control to the ball-and-socket joint's movements. Once the squeeze trigger is released, any adjustments to the position of the ball-and-socket joint are locked into place. Alternatively, the 322RC2 can be transformed into a joystick-grip ball head suitable for right or left-handed use with the control handle oriented vertically and the quick release adapter attached to the top of the configuration. When oriented for a horizontal grip, the 322RC2 has a load capacity of 11.0 lb, and 7.0 lb when configured as joystick for a vertical grip. The cam lock also features a safety catch to prevent a quick release plate from accidentally disconnecting. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the quick release plate, which measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface.
Manfrotto 405 Specs General Head Type Pan & Tilt Head Base Mount 3/8"-16 Thread Camera Mounting Screw 1/4"-20 Male, 3/8"-16 Male Quick Release Plate Type RC4 Load Capacity 16.5 lb / 7.48 kg Number of Bubble Level(s) 3 Material Aluminum Pan & Tilt Range Lateral Tilt -90° to +30° Vertical Tilt -30° to +90° Panning Range 360° Physical Base Diameter 2.36" / 6 cm Dimensions H: 6.3" / H: 16.0 cm Weight 3.53 lb / 1.6 kg
Head Weight: 45.85 oz Weight Load: 15.43 lbs Material: Magnesium Head Type:Video/Fluid Head Top Attachment: 1/4″ screw Friction Control: Yes Front Tilt: -90° / +90° Lateral Tilt: +90° / -20° Panoramic Rotation:360 Ball Locking: No Color:Black Pan Lock: Yes Tilt Lock: Yes Pan Drag: Adjustable from 0 to max level Quick Release: Yes Tilt Drag: Adjustable from 0 to max level
Smooth, High-Quality Ball-Bearing System Steady Glides in All Directions Slanted / Vertical Glides Swings Like a Panoramic Crane Seven Tripod Mount Locations End to End Legs Compensate for Bumpy Surfaces
Smooth, High-Quality Ball-Bearing System Steady Glides in All Directions Slanted / Vertical Glides Swings Like a Panoramic Crane 5 ft Slide / 200 lb Weight Capacity Seven Tripod Mount Locations End to End Legs Compensate for Bumpy Surfaces
The Matthews Monitor Mount is a strong, versatile and compact aluminum bracket that enables you to mount your flat-panel monitor to a light stand, C-Stand, or any other grip equipment with a 5/8" Baby pin/stud. It features a locking pan and tilt handles.
A strong, versatile and compact aluminum bracket that enables you to mount your flat-panel monitor to a light stand, C-Stand, or any other grip equipment with a 5/8" Baby pin/stud. It features a locking pan and tilt handles.
This ball head will support up to 39.6 lb (18 kg). It is supplied with a precision machined quick release plate that is well balanced and allows quick, safe and positive-locking of the camera to the ball head mount. The mounting plate can stay permanently attached to the camera to avoid taking the time to screw the camera onto the ball or screwing the ball onto the camera.
Manfrotto 058B Load Capacity: 26.5 lb Max Height: 85.4" Min Height: 17.3" Folded Length: 37" Leg Sections: 2 Weight: 13.6 lb Geared Center Column Auto Leg Release The Manfrotto 058B Aluminum Triaut Tripod is a professional tripod ideal for use with medium format and 4x5" cameras. It features a built-in bubble level, and automatic leg release system which allows for simultaneous or individual release of the leg sections. This system permits the legs to be extended and the tripod leveled and locked in seconds without the need for individual leg adjustments. Telescoping the legs is achieved by activating the same release.
Manfrotto 055xprob Supports 15.43 lb Max Height: 70.28" Minimum Height: 3.94" Folded Length: 25.79" Leg Sections: 3 Weight: 5.29 lb Independent Leg Angle Selector Q90 Horizontal Center Column Feature Spirit Level The black Manfrotto 055XPROB Aluminum Tripod features the Manfrotto-patented horizontal center column feature, which allows the center column to flip quickly and easily from vertical to horizontal. By extending the column to its highest vertical position, it can be swung over to horizontal without removing the head or disassembling the column itself. The 055XPROB's flip-locks allow quick adjustment to the tripod's maximum height of 70.3" or minimum height of just 3.94". It is ideal for use with 35mm and light medium-format photographic cameras and video camcorders.
Tripod Weight: 217.62 oz Material: Aluminum Weight Load: 26.46 lbs Min. Height: 17.32 in Max. Height: 65.94 in Head Type: Video/Fluid Head Color:Black Quick Release: Yes Front Tilt -60° / +90° Pan Drag: Adjustable from 0 to max level Panoramic Rotation: 360 Tilt Drag: Adjustable from 0 to max level
Horizontal Arm Travel 12" (30.7cm) Length 23.6" (60cm) Weight 2.4 lbs (1.1kg) The Manfrotto 131DDB Tripod Accessory Arm for Four Heads mounts onto the center column of tripods with 3/8" threads. The platforms feature 3/8" screws, which allow a standard tripod head to be mounted on either or both sides. In addition, the horizontal bar features 3/8" screws on both ends, allowing mounting of tripod heads from the sides.
No Speedrail Included The Dana Dolly Portable Dolly System Kit with universal track ends is a heavy duty camera dolly platform that rides on 16 custom modified soft polyurethane wheels that resist flat spotting and use ABEC-7 rated precision bearings providing you with extremely smooth dolly shots. This kit is complete with 75, 100, and 150mm bowl adapters, and comes in a custom flight case. The wheel trucks swivel, allowing the dolly to ride on available straight or curved track, which you must rent separately.