The 500Ws light has a 10-stop variable power range and swift recycle times of 0.05 to 2.5 seconds. Freeze Mode, which prioritizes flash duration yields a very short 1/50,000 second at minimum power. The B10 Plus is powered by a lithium-ion battery that gives you 200 full-power flashes on a 90-minute charge, while 60 minutes will top up the battery to 80% if you're short on time. Benefits 500Ws Lightweight and cordless Flash with the power of 10 speedlights Continuous modeling light with adjustable brightness and color temperature Flexibility to set up on camera tripods or light stands Compatibility with 120+ Profoto light shaping tools including the full OCF range Compatibility with all Profoto Air TTL Remotes and the Profoto A1 Smartphone connectivity with the Profoto app Freeze Mode prioritizes flash durations as short as 1/50,000 second
The Pro-B4 is a state of the art battery pack that in some regards outperforms even the best studio packs out there. It’s a revolution on location and unique in that it’s a battery pack that can freeze motion at 1/25,000 a second and fire up to 30 flashes in a second.
Profoto Pro-10 Features 2400Ws with two outlets individually adjustable in 1/10 f-stop increments over an 11 f-stop power range Bursts up to 50 flashes per second with flash durations up to 1/80,000 of a second. High-resolution display with a superior, intuitive interface with large dials. Fully integrated with all Profoto Air and AirTTL camera remotes. Recycle time: 0.02-0.7s. Flash duration (t0.5): 1/80,000-1/800s*sec. *Comparable with 1/2,000s (t0.5) in conventional studio flashes. High Speed Sync up to 1/8,000s Shoot in TTL or manual mode. Firmware upgrades from Profoto installs easily via built-in USB port. Compatible with 11 different flash heads and 120+ Light Shaping Tools from Profoto's renowned light shaping system
Main power controls for each head are top and center. Levels can be set in 0.1 stop increments with a flick of each knob, or in full stop increments by pushing down and turning each knob. Default readout is in stops, with "10" being full power. Readouts may be seen temporarily in Watt/Seconds with a push of a button. Secondary controls for the modeling light, radio slave, recycle speed and audible recycle tone are visible from the top, but controlled from the sides. The truly impressive features of this 2400 watt/second power pack are found in its performance. The 8a Air has extremely short recycle times which allow it to fire up to 20 times a second (stroboscopic). Power and color fluctuations are not visible in the image to the human eye (±1/50 f/stop and ±40°K flash-to-flash, respectively). The power levels may be controlled from the optional Profoto Air transceiver and/or the optional USB transceiver, from your Mac or PC.
Uses OCF Attacments -1000W -Not Battery Powered 2 x Power Cords, 1 x Padded Bag 0.03-1.2 Sec Recycling Built-In AirTTL Radio Receiver 1/50,000 Sec Freeze Mode Flash Duration Quick Burst: Up to 20 Frames per Second 10-Stop Power Range: 2-1000Ws High Speed Sync to 1/8000 Sec 300W Modeling Lamp 100-240 VAC