Search
Misc Grip
Bale Block/ TVMP
With an external diameter to fit into a Junior receiver, and a 5/8' female bore for mounting on a Baby pin, the threaded 1/2'-13 top attaches right to the lamp yoke.
$2.00 per 1 day(s)
Basso Blocks - Set Of 12
Basso Blocks supplement conventional Apple Boxes. Their unique design allows them to stack and get the same elevating ablility as Apples, while occupying 66% less space. A full set of Basso Blocks is equivalent to 12 half Apples.
$15.00 per 1 day(s)
Ceiling Clip/Scissor Clip
Is used to mount a small to medium size light fixture from a drop ceiling frame. Standard 5/8" Baby stud.
$2.00 per 1 day(s)
Cheese Borough - Fixed
For clamping a pipe to a pipe. Fixed cheeseborough for right angle junctions.
$5.00 per 1 day(s)
Cheese Borough - Swivel
For clamping a pipe to a pipe. The swivel provides added versatility to rig in multiple directions.
$5.00 per 1 day(s)
Condor Mount - Deluxe
Use to mount lights directly to the front edge of the bucket on a Condor Crane.
Weight: 10lbs
$25.00 per 1 day(s)
Cup Blocks - Set Of 12
This Cup Block is made of wood and is usually placed under wheeled objects in place of apple boxes in order to elevate objects and to prevent them from rolling.
Dimensions:
-5.25" x 5.25" x 1.50"
-0.5" deep dished out center
$3.00 per 1 day(s)
Grip Helper
The Grip Helper is a combination of several adapters in one. The Junior Pin of the Grip Helper mounts into a light stand, and the Junior Receiver allows the mounting of a light fixture without upsetting the center of balance. In between there is a 3' to 6' telescoping Extension Arm fixed at a 45 degree angle with a 4-1/2' Grip Head attached. By using the Grip Helper, a large light fixture and Diffusion Frame up to 48'x48' can be used from the same stand.
$5.00 per 1 day(s)
J - Hook
A U-Hook bracket that can be used to hang cables; or, when used in pairs, to suspend tubes, pipes, backgrounds, or even to support a horizontal Matthpole.
$2.00 per 1 day(s)
Lollipops (4.5” Grip Head)
Weight: 5lbs
Socket Size: 1 1/8 inches
Spigot Size: 1 1/8" inches
Designed to convert a Junior Stand to and overhead stand, the D400 incorporates a 4 1/2" grip head with a junior (1 1/8") stud and receiver.
$5.00 per 1 day(s)
Magic Arm - Pin to Camera Plate
Our Manfrotto Variable Friction Magic Arm with Quick Release is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. Its camera platform has a quick release mechanism and removable camera plate. The camera plate has a 1/4"-20 thread.
$7.50 per 1 day(s)
Magic Finger
Unique grip tool with a 5/8" pin attached to the ball joint that pivots from -15° to +90° while the collar rotates 360°. All axis lock positively with one locking handle.
$4.00 per 1 day(s)
Matthews - Quasar MQ Mount
The MQ Mount is designed to securely hold T-12 LED fixtures with minimal or no light loss. The mount terminates to an industry standard 3/8” pin which can be used with any industry grip head. The 3/8” pin is knurled to prevent unwanted rotation and is internally tapped ¼”-20 to expand its length and rigging capabilities.
part#420114
Key Features:
Jaws designed for T-12 LED light tubes
Knurled 3/8” pin compatible with all grip heads, including 2.5”, 4.5”, mini and microgrip heads.
Tapped ¼”-20 pin for expanded rigging and expanded length.
Manufactured from lightweight, high impact plastic and aluminum parts.
$3.50 per 1 day(s)
Meat Axe - Mini
The Meat Axe incorporates a uniquely designed Grip Head with simultaneous 3-axis adjustment. Will support any size Meat Axe Flag or conventional Scrims or Cutters. Unquestionably the strongest device of its kind available.
$5.00 per 1 day(s)
Meat Axe - Regular
The Meat Axe incorporates a uniquely designed Grip Head with simultaneous 3-axis adjustment. Will support any size Meat Axe Flag or conventional Scrims or Cutters. Unquestionably the strongest device of its kind available.
$5.00 per 1 day(s)
Menace Arm Kit
This 3 piece kit is designed for use with 1¼” speedrail. This kit allows to you to make a boom arm in any length (from 5’ up to 20’). Mounts on any stand with a 3½ ” grip head.
$20.00 per 1 day(s)
Mini Wall Spreader 5/8
Uses baby (5/8") pipe to span a room or structure to create a lighting grid in any room. Used to hang light weight lights, flags, silks, etc.
$5.00 per 1 day(s)
Offset Arms - Baby
Mounts on a baby stand with 5/8" diameter stud. Has (2) studs top and bottow. Allows you to offset the light fixture 14", great for getting into tight spaces or over the camera lens.
$4.00 per 1 day(s)
Offset Arms - Junior
Offset Arms are a convenient tool when a lighting fixture needs to be placed off-center for the purpose of hiding the stand behind a set wall or coming over the top of the set.
$4.00 per 1 day(s)
Riser - Junior
Allows a junior mounting point to have a 3 foot extension.
Weight: 4 lbs
Height: 44″
Width: 6″
$5.00 per 1 day(s)
Safety Cables
Strong metal wire used to secure and provide added protection to hanging lights.
$1.00 per 1 day(s)
Seamless Kit
Our seamless is ideal for the photographer on the go. The stand is lightweight and compact, with the ability to collapse down for easy travel.
The stands are designed to safely support 9' rolls of seamless paper, as well as cloth backgrounds as heavy as muslin.
$29.00 per 1 day(s)
Speedrail Spreaders
A quick and easy way to create a on location lighting grid.
End cup (non adjusting) mounts on one end of 2x4 and the Adjustable End Cub mounts on the other end. End cups must press against wall studs, then just turn adjuster to expand an put pressure against wall studs. Wall Spreader should be properly secured with back up safety cables or chains before mounting lights.
$5.00 per 1 day(s)
Spud Adaptor - Baby To Junior
The spud adaptor is used to change into a baby receiver or a junior receiver.
$2.00 per 1 day(s)
Suction Cup - 5/8 Spud
This suction cup mount uses a 5.8" (15 cm) suction cup to adhere to any flat non-porous surface. It's best suited for holding small lights, lightweight cameras, scrims, flags or articulated arms.
$5.00 per 1 day(s)
Suction Cup - W/ Ball Mount
Unlike most other ball head mounts which are manufactured from die cast components, the Matthews BH-30 Ball Head with 10" (25cm) Suction Cup Mount we carry is individually CNC machined from solid bar stock to ensure precise control over all critical dimensions and elements.
$20.00 per 1 day(s)
Suction Cup - W/ Swivel Pin
Our swivel pin suction cup uses a 5.8" (15 cm) suction cup to adhere to any flat non-porous surface. It features a ball-joint socket which rotates within a half hemisphere. It's best suited for holding small lights, small lightweight cameras, scrims, and flags.
$15.00 per 1 day(s)
Sweeptable - 4’ X 8’ Adjustable
A sweep table is ideal to use when photographing products.
Our sweep table measures 4’ x 8’ and is slightly over 3’ tall.
We send ours out with a 4’ x 8’ sheet of milk glass plexiglass.
$70.00 per 1 day(s)
Trapeze Hanger - Junior
Used to fly a small light with rings welded at each end of the trapezes for attaching ropes or cable.
$2.00 per 1 day(s)
Tree Branch Holder
Our tree branch holder safely enables the use of a real tree branch instead of a cello or wood cookie. Allowing for natural branch movement, it also hides a multitude of problems when placed in the foreground of a shot, or should the shot require, coming in from the side.
Weight: 3.5 lbs
Height: 16″
Width: 8″
$5.00 per 1 day(s)
Triple Header - Baby
This handy adapter allows you to mount multiple light fixtures or accessories onto a single stand. It features five baby studs with embossed necks welded onto sturdy steel and offset for mounting five lights. Can be mounted on the stand top of a baby stud (16mm) or fit into a junior receiver (28mm).
$5.00 per 1 day(s)
Triple Header - Junior
This handy adapter allows you to mount multiple light fixtures or accessories onto a single stand. It features five baby studs with embossed necks welded onto sturdy steel and offset for mounting five lights. Can be mounted on the stand top of a baby stud (16mm) or fit into a junior receiver (28mm).
$5.00 per 1 day(s)
Trombone Hanger - Baby Or Jr.
Designed to hang on a set wall
Retaining arms adjust to the thickness of set wall for security
90 degree offset
Telescopes in two sections
Telescopes 18" to 48"
$5.00 per 1 day(s)
Truss - Truss - 12” Square Box Truss 6’ Long
6’ Box Truss
- 12” x 12”
- 4 pieces available
$20.00 per 1 day(s)
Turn Table - 15”
15" turn table
20lb Weight limit.
Includes hard case and remote
$50.00 per 1 day(s)
Turn Table - 18”
18" turn table
40lb Weight limit.
Includes hard case and remote
$75.00 per 1 day(s)
Wall Jacks - Set Of Two
Steel wall jacks for moving flats around a set or stage.
$30.00 per 1 day(s)
Wall Spreaders - 2’ X 4’ (3 Piece total )
A quick and easy way to create a on location lighting grid.
End cup (non adjusting) mounts on one end of 2x4 and the Adjustable End Cub mounts on the other end. End cups must press against wall studs, then just turn adjuster to expand an put pressure against wall studs. Wall Spreader should be properly secured with back up safety cables or chains before mounting lights.
$5.00 per 1 day(s)
Payment options
